Introduction
4-2 October 2019 16K PLUS
Introduction
This Operator’s Manual has been carefully prepared
to provide the necessary information regarding the
operation and adjustments, so that you may obtain
maximum service and satisfaction from your new ProAG
Bale Runner 16K PLUS.
To protect your investment, study your manual before
starting or operating in the eld. Learn how to operate
and service your Bale Runner 16k PLUS correctly,
failure to do so could result in personal injury or
equipment damage.
If you should find that you require information not
covered in this manual, contact your local ProAG Dealer.
The Dealer will be glad to answer any questions that
may arise regarding the operation of your ProAG Bale
Runner 16k PLUS.
ProAG Dealers are kept informed on the best methods of
servicing and are equipped to provide prompt, efcient
service if needed.
Occasionally, your Bale Runner 16k PLUS may require
replacement parts. Your Dealer will be able to supply
you with the necessary replacement parts required. If
the Dealer does not have the necessary part, the ProAG
Factory will promptly supply the Dealer with it.
Your ProAG Bale Runner 16k PLUS is designed to give
satisfaction even under difcult conditions. A small
amount of time and effort spent in protecting it against
rust, wear and replacing worn parts will increase the
life and trade-in value.
Keep this book handy for ready reference at all times. It is the policy of ProAG to improve its products whenever
it is possible to do so. The Company reserves the right to make changes or add improvements at any time without
incurring any obligation to make such changes on machines sold previously.
To Next Page
Loading...
