Maintenance
6-4 January 2019
Lubrication
Greasing pivot points prevents wear and helps restrict
dirt from entering. However, once dirt does enter a
bearing, it combines with the lubricant and becomes an
abrasive grinding paste, more destructive than grit alone.
• Apply new lubricant frequently during operation to
ush out old contaminated lubricant.
• Use a good grade of lithium based grease.
• Use a good grade of machine oil.
• Clean grease ttings and lubricator gun before
applying lubricant.
Refer to the photos for grease tting locations.
1. Wheel Hubs
• Grease every 50 hours or seasonally, whichever
occurs rst.
2. Gauge Wheel Castor Pivot
• Grease every 50 hours.
3. Packer Wheel Hubs
• Grease every 50 hours or seasonally, whichever
occurs rst.
1
2
3
To Next Page
Loading...
