Moto Q - Dialing Emergency Calls; Calling with Speed Dial

PAGE 44 Using Caller ID CALLING FEATURES
Using Caller ID
Calling line identification (caller ID) shows the phone
number for an incoming call on your home screen.
Your phone shows the caller’s name and picture when
they’re stored in your phonebook, or
Incoming Call
when caller ID information isn’t available.
You can set your phone to play a distinctive ring for
specific entries in your phonebook (see page 48).
Dialing Emergency Calls
Your service provider programs one or more emergency
phone numbers, such as 911 or 112, that you can call
under any circumstances, even when your phone and
keypad are locked.
Note: Emergency numbers vary by country. Your phone’s
preprogrammed emergency number(s) may not work in
all locations, and sometimes an emergency call cannot
be placed due to network, environmental, or
interference issues.
1. Dial the emergency number.
2. Press N .
Dialing International Calls
If your phone service includes international dialing, press
and hold
0 to insert your local international access
code (indicated by
+ ). Then, press the keypad keys to
dial the country code and phone number.
Calling with Speed Dial
You can use speed dialing in two ways: quick access for
up to 98 phone numbers and shortcuts to features
found in the Start menu including e-mail, calendar, and
Bluetooth Manager.
To access speed dial entries, press and hold the single-
digit speed dial number for one second. If the speed dial
is two digits, press the first digit, then press and hold the
second digit. The phone dials the phone number, opens
a new e-mail message, or goes to the Web page.
Phone Numbers
You can set the speed dial to call the entries in your
phone’s contact list:
1. Press Start > Contacts .
2. Scroll to the desired contact and press the center
select key (
s ).
3. Select the phone number, e-mail address, or web for
which to create the speed dial.
4. Press Menu > Add to Speed Dial.
5. In the Keypad Assignment , select the speed dial
number to use.
6. Press Done .
Note: Speed dial 1 is reserved for calling your voicemail.
To delete a speed dial, press
Start > Speed dial >
[
entry ] > Menu > Delete .