3 Press the Menu Select button directly below Sel.
4 If there are devices being paired or connected, or along the list of <Device Friendly
Name> to see the status of each device.
If there are no active Bluetooth devices being paired or connected, the display shows No
devices.
5 Perform one of the following actions:
• To clear the device from the list,
or to the required device, press the Menu Select
button directly below Clr.
• To exit from this function, press the Menu Select button directly below Back to return to the
previous screen without deleting the device name.
If Clr is selected, the display shows <Device Friendly Name> clear?.
6 Press the Menu Select button directly below Yes or No to proceed delete the device or to exit
this function and return to previous screen.
If the device is deleted successfully, the display shows <Device Friendly Name> cleared to
indicate clearing is successful.
If the device is not deleted successfully, you hear the radio sounds a short, low-pitched tone. The
display shows <Device Friendly Name> clear failed. The display returns to previous screen.
Postrequisites:
NOTE: If Re-Pair Timer is set to infinite and you clear keys on the radio, you must clear keys on
all previously paired devices as well. (Please see your Accessories manual for further details.)
7.24.4
Pairing with LEX Handheld
Prerequisites: Ensure that Bluetooth feature of your radio is on and the Bluetooth tones are enabled.
Procedure:
1 Turn on the handheld and activate the Bluetooth feature.
2 Place the handheld close to the radio aligning the Bluetooth Pairing Location on the handheld
with the Bluetooth Pairing Location on the radio.
If the pairing process is successful, you hear an incremental-pitched tone from the radio. The
radio begins to connect to the handheld. If the connecting process is successful, you hear an
incremental-pitched tone. The display shows <Device Friendly Name> connected, and
the Bluetooth icon turns from to .
If unsuccessful, one of the following scenarios occur:
• You hear a short, low-pitched tone and the display shows Bluetooth pairing failed (if
pairing fails).
• You hear a decremental-pitched tone and the display shows <Device Friendly Name>
unpaired (if the connection fails within 6 seconds).
• You hear a short, low-pitched tone and the display shows <Device Friendly Name>
connect failed (if the radio has the pairing record of the handheld and the connection
fails).
68012003048-GW
Chapter 7 : Advanced Features
104
To Next Page
Loading...
