Motorola solutions APX 6000XE - Stopping SSA Notification of All Available Sites; Wi-Fi; Turning Wi-Fi on or off

If one or more sites are not available, the display shows Not all sites available. Repeat
step 3.
5 To return to the Home screen, press the Menu Select button directly below Exit.
The SSA Alert for all sites stop.
7.27.6
Stopping SSA Notification of All Available Sites
Procedure:
1
or to SSA.
2 Press the Menu Select button directly below SSA.
The display shows the Site Alert screen.
3 or to Stop Alert and press the Menu Select button directly below Sel.
The display shows the Select Site screen.
4 or to [All Avail] and press the Menu Select button directly below Send.
The display shows Sending req.
If radio is out of range, roaming to a foreign system or in a failsoft situation, the display shows
Req failed.
If the request is successful, the display shows Req successful.
5 To return to the Home screen, press the Menu Select button directly below Exit.
The SSA Alert for all available sites stop.
7.28
Wi-Fi
You can connect your radio to a Wi-Fi network for wireless programming and SmartConnect features.
Your service administrator programs the Wi-Fi Service Set Identifier (SSID) or network name that your
radio can connect to.
7.28.1
Turning Wi-Fi On or Off
When and where to use: Do one of the following to turn Wi-Fi on or off. You can use the options
interchangeably depending on your preference and the programmed functions.
Procedure:
• Turning Wi-Fi on or off using the preprogrammed button:
a. To toggle the Wi-Fi on or off, press the preprogrammed Wi-Fi button.
This button must be preprogrammed by a qualified radio technician. Check with your dealer
or system administrator for more information.
• Turning Wi-Fi on or off using the radio menu button:
a.
or to WiFi and press the Menu Select button directly below WiFi.
68012003048-GW
Chapter 7 : Advanced Features
111