5.4.3
Receiving and Responding to a Telephone Call (Trunking Only)
This feature allows you to receive calls similar to standard phone calls from a landline phone.
When and where to use:
When you receive a Telephone Call, you hear a telephone-type ringing and the LED blinks green. The
backlight of the screen and the bar turns green.The display shows Phone call and the call received
icon blinks.
Procedure:
1 Press the Call Response button within 20 seconds after the call indicators begin.
2 Press and hold the PTT button to talk. Release the PTT button to listen.
3 Press
or the Call Response button to hang up and return to the Home screen.
5.5
Methods to Make a Radio Call
You can select a zone, channel, subscriber ID, or talkgroup by using:
• The preprogrammed Zone switch.
• The 16-Position Select Channel Knob.
• A preprogrammed button.
• The Contacts list (see Viewing Details of a Contact on page 56).
5.5.1
Making a Talkgroup Call
Procedure:
1 Turn the 16-Position Select Channel Knob to select the channel with the desired talkgroup.
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.
3 Press the PTT button to make the call.
The radio shows different indicators based on the system the radio is configured.
• For ASTRO Conventional system, the LED lights up solid red. The display shows the
talkgroup alias or ID.
• For Trunking system, the LED lights up solid red.
4 Speak clearly into the microphone.
5 Release the PTT button to listen.
5.5.2
Making a Private Call (Trunking Only)
When and where to use: This feature allows you to send an individual Call Alert or page if there is no
answer from the target radio.
Procedure:
1 Perform one of the following actions:
68012003048-GW
Chapter 5 : General Radio Operation
40
To Next Page
Loading...
