• If the channel or mode selected is unprogrammed, the display shows Unprogrammed.
7.16.2
User Login Feature
This feature allows you to take on a friendly username such as Text Messaging Service (TMS).
You can still send text messages without logging in as a user. The user login feature only enables the
recipient of your message to identify you as the sender by assigning a username to your message.
This feature is only applicable for Land Mobile Radio (LMR) Messaging.
NOTE: A predefined username that is set more than the maximum allowed characters is an
invalid name.
7.16.2.1
Logging In as a User
Procedure:
1 Perform one of the following actions:
• Press the preprogrammed User Login button.
•
or to User and press the Menu Select button directly below User.
The display shows the User Login screen.
2 Perform one of the following actions:
• or to scroll through the list of predefined user names. Press the Menu Select button
directly below Logn to select the predefined username.
• Press and hold or to scroll through the list of predefined user names at a fast scroll
rate. Press the Menu Select button directly below Logn to select the predefined user name.
One of the following scenarios occurs:
• If the ID is invalid, the display shows momentary Invalid ID.
• In ARS Server Mode, the display shows the User Login Indicator icon, the ID, and In
progress, with Cncl .
• In ARS Non-Server Mode, the display shows the User Login Indicator icon, the ID, and
Logged in, with Logt and Exit.
• In non-ARS enabled mode, the display shows Offline, with Logt and Exit.
One of the following scenarios occurs:
• If the user name is invalid, login fails and the user login failure indicator (IP indicator) icon blinks.
The display also shows Login failed.
• Wait for the logged in confirmation screen. If the login process is successful, the display shows the
successful user login indicator (IP indicator) icon and Logged in, with Logt and Exit.
NOTE: To cancel the login process and return to the initial user login screen, press the Menu
Select button directly below Cncl.
7.16.2.2
Logging Out
Prerequisites: When you have logged in or you are using Offline mode, you can log out.
68012003048-GW
Chapter 7 : Advanced Features
76
To Next Page
Loading...
Need help?
General
