EasyManuals Logo

Motorola solutions APX 6000XE User Manual

Motorola solutions APX 6000XE
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
To access this feature using a preprogrammed button, press the preprogrammed Private
Call button to dial the preprogrammed ID (number) and initiate the Private Call. Proceed to
step 4.
or to Call , and press the Menu Select button directly below Call .
The display shows the last transmitted or received ID.
2 To select the required ID, perform one of the following actions:
Press the Menu Select button directly below Cnts to scroll through and select the required
ID.
Press the Menu Select button directly below LNum to go to the last number dialed.
or to the required ID.
3 Press the PTT button to initiate the Private Call.
The display shows Calling... <Number>.
4 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.
When you are connected, the display shows the ID of the target radio.
If no acknowledgment is received, the display shows No acknowledge.
5 Press and hold the PTT button to talk. Release the PTT button to listen.
6 Press
to return to the Home screen.
5.5.3
Making an Enhanced Private Call (Trunking Only)
Prerequisites: Your radio must be preprogrammed to allow you to use this feature.
When and where to use: This feature allows you to send an individual Call Alert Page if there is no
answer from the target radio. See Sending a Call Alert Page on page 60 for more information.
Procedure:
1 Perform one of the following actions:
To access this feature using a preprogrammed button, press the preprogrammed Enhanced
Private Call button to dial the preprogrammed ID (number) and initiate the Private Call.
Proceed to step 4.
or to Call, and press the Menu Select button directly below Call.
The display shows the last transmitted or received ID.
2 To select the required ID, perform one of the following actions:
Press the Menu Select button directly below Cnts to scroll through and select the required
ID.
Press the Menu Select button directly below LNum to go to the last number dialed.
or to the required ID.
3 Press the PTT button to initiate the Private Call.
The display shows Calling... <Number>.
4 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.
When you are connected, the display shows the ID of the target radio.
68012003048-GW
Chapter 5 : General Radio Operation
41

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Motorola solutions APX 6000XE and is the answer not in the manual?

Motorola solutions APX 6000XE Specifications

General IconGeneral
BrandMotorola solutions
ModelAPX 6000XE
CategoryTwo-Way Radio
LanguageEnglish

Related product manuals