Motorola solutions APX 6000XE - Selecting a Channel Within a Zone; Changing a Channel Parameter; Editing Parameters

7.29.18.3
Selecting a Channel within a Zone
Procedure:
1 Press or to FPP and press the Menu Select button directly below FPP.
The radio displays the Enter password screen
2 Enter the password and press the Menu Select button directly below Ok.
3 Press
or to select Zn/Ch.
4 Press or to select the required zone and press SEL to view the channels.
5 Press or to select the required channel and press SEL to access the channel parameter.
The radio displays the channel parameter screen.
6 Press or to select the required channel parameter.
7.29.18.4
Changing a Channel Parameter
Procedure:
1 Press
or to FPP and press the Menu Select button directly below FPP.
The radio displays the Enter password screen
2 Enter the password and press the Menu Select button directly below Ok.
3 or to scroll through the various information.
4 Press EDIT to edit the channel parameter.
5 Change the parameter value.
6 Press OK to accept the parameter change and return to view mode.
7 Perform one of the following actions and proceed to the next step:
• or to select other channel parameters.
• Press BACK to access a different channel and make any necessary programming changes.
8 Press BACK to return to Zone List Selector.
9 Press BACK to return to FPP main menu.
10 Press
to return to the Home screen.
7.29.18.5
Editing Parameters
When and where to use: For all parameters except Chan Name, Zone Name, Top Chan Name and
Top Zone Name the or buttons increment or decrement the selected value by scrolling through the
valid entries.
Procedure:
1 Perform the following actions based on the type of the parameter:
68012003048-GW
Chapter 7 : Advanced Features
124