8-17
AP7131>admin(network.lan.bridge)> show
Description:
Displays the mesh bridge configuration parameters for the access point’s LANs.
Syntax:
Example:
admin(network.lan.bridge)>show
** LAN1 Bridge Configuration **
Bridge Priority :32768
Hello Time (seconds) :2
Message Age Time (seconds) :20
Forward Delay Time (seconds) :15
Entry Ageout Time (seconds) :300
** LAN2 Bridge Configuration **
Bridge Priority :32768
Hello Time (seconds) :2
Message Age Time (seconds) :20
Forward Delay Time (seconds) :15
Entry Ageout Time (seconds) :300
For an overview of the access point’s mesh networking options using the applet (GUI), see Configuring Mesh Networking on page 9-1.
show Displays mesh bridge configuration parameters for the access point’s LANs.
To Next Page
Loading...
