Motorola AP-7131 - Page 346

AP-7131 Access Point Product Reference Guide8-18
AP7131>admin(network.lan.bridge)> set
Description:
Sets the mesh configuration parameters for the access point’s LANs.
Syntax:
Example:
admin(network.lan.bridge)>set priority 2 32768
admin(network.lan.bridge)>set hello 2 2
admin(network.lan.bridge)>set msgage 2 20
admin(network.lan.bridge)>set fwddelay 2 15
admin(network.lan.bridge)>set ageout 2 300
admin(network.lan.bridge)>show
** LAN1 Mesh Configuration **
Bridge Priority :32768
Hello Time (seconds) :2
Message Age Time (seconds) :20
Forward Delay Time (seconds) :15
Entry Ageout Time (seconds) :300
** LAN2 Mesh Configuration **
Bridge Priority :32768
Hello Time (seconds) :2
Message Age Time (seconds) :20
Forward Delay Time (seconds) :15
Entry Ageout Time (seconds) :300
For an overview of the access point’s mesh networking options using the applet (GUI), see Configuring Mesh Networking on page 9-1.
set priority <LAN-idx> <seconds> Sets bridge priority time in seconds (0-65535) for specified LAN.
hello <LAN-idx> <seconds> Sets bridge hello time in seconds (0-10) for specified LAN.
msgage <LAN-idx> <seconds> Sets bridge message age time in seconds (6-40) for specified LAN.
fwddelay <LAN-idx> <seconds> Sets bridge forward delay time in seconds (4-30) for specified LAN.
ageout <LAN-idx> <seconds> Sets bridge forward table entry time in seconds (4-3600) for specified LAN.