AP-7131 Access Point Product Reference Guide8-80
AP7131>admin(network.wireless.security)>show
Description:
Displays the access point’s current security configuration.
Syntax:
Example:
admin(network.wireless.security)>show summary
----------------------------------------------------------------------
Secu Policy Name Authen Encryption Associated WLANs
----------------------------------------------------------------------
1 Default Manual no encrypt Lobby
2 WEP Demo Manual WEP 64 2nd Floor
3 Open Manual no encrypt 1st Floor
WPA Countermeasure enable
admin(network.wireless.security)>show policy 1
Policy Name : Default
Authentication : Manual Pre-shared key/No Authentication
Encryption type : no encryption
Related Commands:
For information displaying existing WLAN security settings using the applet (GUI), see Enabling Authentication and Encryption
Schemes on page 6-5.
show summary Displays list of existing security policies (1-16).
policy <id> Displays the specified security policy <id>.
create Defines security parameters for the specified WLAN.
To Next Page
Loading...
