8-81
AP7131>admin(network.wireless.security)>set
Description:
Enables/disables the WPA countermeasure.
Syntax:
Example:
admin(network.wireless.security)set wpa-countermeasure enable
admin(network.wireless.security)>show summary
----------------------------------------------------------------------
Secu Policy Name Authen Encryption Associated WLANs
----------------------------------------------------------------------
1 Default Manual no encrypt Lobby
2 WEP Demo Manual WEP 64 2nd Floor
3 Open Manual no encrypt 1st Floor
WPA Countermeasure enable
Related Commands:
For information displaying existing WLAN security settings using the applet (GUI), see Enabling Authentication and Encryption
Schemes on page 6-5.
set <mode> Enables/disables WPA countermeasures.
create Creates security parameters for the specified WLAN.
To Next Page
Loading...
