Motorola APX 2500 - Sending a Quick Text Message

Sending a Quick Text Message
Quick Text messages are messages that are predefined
and usually consist of messages that are used most
frequently.
Each Quick Text message has a maximum length of 50
characters.
1 Perform one of the following actions:
• To access this feature using the preprogrammed
button, press the preprogrammed Quick Text
button and proceed to step 4.
• To access this feature using the menu, proceed
to the next step.
2
or to TMS and press the Menu Select button
directly below TMS to access the TMS feature
screen.
3 Perform one of the following actions:
•
or to Comp and press the Menu Select
button directly below Sel.
• Press the Menu Select button directly below
Exit to return to the Home screen.
4
or to List.
5 or to scroll through the list of messages and
press the Menu Select button directly below Sel to
select the required message.
The message appears on the Compose screen, with
a blinking cursor at the end of it. Use the keypad to
edit the message, if required.
6
Press the Menu Select button directly below Optn .
7
or to Send and press the Menu Select button
directly below Sel .
8 Perform one of the following actions to send the
message:
• or to scroll through the address list and
select the required address. The message is sent
after the address is selected.
•
or to [Other Recpnt] and press the Menu
Select button below Edit. When a blinking
cursor appears on the Enter Address screen.
Use the keypad to type the address entry.
Proceed to step 10 to send the message.
English
117