2
Press the Menu Select button directly below H/L
momentarily to enable the last selected alarm(s).
The display briefly shows the enabled alarms, and
then reverts back to the selected mode.
Changing the Selected Alarms
1
Press the Menu Select button directly below H/L
until the display shows the required alarm.
2 Perform one of the following actions:
• Press the Menu Select button directly below H+L
to turn on both horn and lights.
• Press the Menu Select button directly below
Lgts to turn on the lights.
• Press the Menu Select button directly below
Horn to turn on the horn.
One of the following scenarios occurs:
• If you choose H+L, the display shows Horn/
Lites on.
• If you choose Lgts, the display shows Lights
on.
• If you choose
Horn, the display shows Horn on.
An Off entry is shown at the softkey when one of the
alarms is active. Selecting Off deactivates the
current active alarm.
Receiving a Call While Alarms are Turned
On
When you receive a call with the Alarms turned on, you
hear the vehicle’s horn sounds for 4 seconds, and/or the
car lights turn on for 60 seconds.
The display shows the type of call received (Call, Page, or
Phone) and the selected mode name.
The time interval can be modified by a qualified radio
technician.
Turning Off Non-Rearmable External
Alarms
1 Perform one of the following actions:
• Press the Menu Select button directly below
Call, Page or Phon to turn off the external
alarm(s) and access that feature.
English
180
To Next Page
Loading...
