2 To turn off the radio, press the Power button after
the LEDs light up.
NOTICE:
The duration that user must press and hold
the Power button to turn off the radio is
programmable by a qualified radio technician.
Adjusting the Volume
1 To increase the volume, rotate the Multi-Function
Knob clockwise.
2 To decrease the volume, rotate this knob
counterclockwise.
The display shows volume bars and volume level when you
change the volume.
Validating Compatibility During
Power Up
The radio validates and updates the software and hardware
of your control head(s) during power up. During validation,
the display shows Maintenance Mode Remote Device
promptly followed by other maintenance statuses.
Press the Power On/Off Button to reset when the
display shows Update done Please reset upon
completion, or when the display shows Update
failed Please reset when it fails to update.
If the software updates are complete, the radio runs the
usual power up operation.
If the updates are incomplete, the radio runs the
Maintenance Mode and the display shows Maintenance
Mode Remote Device; promptly followed by other
maintenance statuses again.
English
28
To Next Page
Loading...
