9 or to scroll through the address list and select
the required address.
The message is sent after the address is selected.
10
Press the Menu Select button directly below Send or
press the PTT button to send the message.
The display shows the Send Message screen and
Sending msg.
If the message is sent, you hear a tone and the
display shows Msg sent.
If the message is not sent, you hear a low tone, the
display shows Send failed and returns to the main
TMS screen.
NOTICE:
You can append a priority status and/or a
request reply to your message. See Priority
Status and Request Reply of a New Text
Message on page 118 for more information.
Priority Status and Request Reply of a
New Text Message
Before sending your message, you can append a priority
status and/or a request reply to your message.
Appending a Priority Status to a Text
Message
Ensure that an outgoing message is composed to allow
you to perform this procedure. See Composing and
Sending a New Text Message on page 115 for more
information.
NOTICE:
The Priority Status icon on a message does not
imply that the message gets higher priority over the
other messages when it is being transmitted. It is
just an indication that can be embedded into a
message to let the receiver know that the message
is important.
1
Press the Menu Select button directly below Optn .
English
118
To Next Page
Loading...
