3 Perform one of the following actions:
• Press the Menu Select button directly below
Optn and proceed to the next step.
• Press the Menu Select button directly below
Cnts and proceed to step 6.
4
or to Call and press the Menu Select button
directly below Sel.
5 or to select the call type.
6 Hold the microphone vertically 1 to 2 inches (2.5 to
5.0 cm) from your mouth.
7 Press the PTT button to initiate the call.
During the call, the display shows the subscriber
alias.
8 Press and hold the PTT button to talk. Release the
PTT button to listen.
The LED lights up solid red when the PTT button is
pressed.
If there is no voice activity for a preprogrammed period of
time, the call ends.
If the call reaches the maximum ring time, the call ends.
Adding a New Contact Entry
1
or to Cnts and press the Menu Select button
directly below Cnts .
The entries are alphabetically sorted.
2
or to [New Contact] and press the Menu
Select button directly below Sel .
The display shows Name.
3
Press the Menu Select button directly below Edit.
English
87
To Next Page
Loading...
