If the receiving radio is powered off or already killed,
your radio display shows No Ack.
Once the receiving radio received the command, its screen
locked and request for password.
NOTICE:
To un-stun a radio, follow the procedure in
Unlocking Your Radio.
Radio Kill
This feature allows you to render your radio or another
radio inoperable if the radio is misplaced or lost. When a
radio is killed, the display turns blank and all functions of
the radio are not usable.
The killed radio can only be recovered from KILL with a
special device. Consult an authorized and qualified
technician for details.
Using Remote Kill to Kill Another Radio
Remote Kill allows you to render another radio inoperable
by sending an over the air command using the menu on
your radio.
1
or to Kill.
2
Press the Menu Select button directly below Kill.
The display shows Enter Password.
3 Use the keypad to enter your Tactical Inhibit Encode
Password.
4
Press the Menu Select button directly below OK .
The display shows the radio Contact IDs.
5 Perform one of the following actions:
• or to the required ID.
• Press the Menu Select button directly below
LNum to go to the last number dialed.
• Use the keypad to enter the required ID.
English
134
To Next Page
Loading...
