• Press the preprogrammed Info button.
• or to Info and press the Menu Select button
directly below Info.
2
or to Control map and press the Menu
Select button directly below Sel.
The display shows the Control Map screen.
3 Perform one of the following actions:
• or to scroll through the various information.
• Press the Menu Select button directly below
Back to return to the previous screen.
• Press
to return to the Home screen.
External Alarms (Horn and Lights)
All control heads can be equipped for external alarms (horn
and lights) that are activated when a Call Alert page,
Private Conversation call, or phone call is received.
The radio always powers up with the horn and lights
feature enabled.
NOTICE:
The horn and lights feature must be enabled by a
qualified radio technician.
Using Non-Permanent Horn and Lights
1
Press the Menu Select button directly below H/L
momentarily.
The last selected alarm(s) are enabled, and the
display shows the enabled alarm(s) alternating with
the selected mode, until it is turned off.
2
Press the Menu Select button directly below H/L
momentarily to turn off the alarm(s).
The display shows Horn/Lites off.
Using Permanent Horn and Lights
If Permanent Horn and Lights is enabled, horn and lights
will automatically turn on when the radio powers up.
1
Press the Menu Select button directly below H/L
once to turn off the alarm(s).
English
179
To Next Page
Loading...
