Motorola APX 2500 - Changing Your Tactical Inhibit Password; Enabling or Disabling the Radio Lock Feature (Secure Radios Only)

If the two passwords do not match, repeat step 5 through
step 10.
NOTICE:
If you enter three incorrect old passwords, the radio
exits the password feature. You cannot access this
feature again until you turn the radio off and on.
Changing Your Tactical Inhibit
Password
1
or to Pswd.
2
Press the Menu Select button directly below Pswd.
The display shows Change Password screen.
3
or to Tactical Inh Encode Pswd.
4
Press the Menu Select button directly below Sel .
5 Enter the old password.
6
Press the Menu Select button directly below OK .
7 Enter the new password.
8
Press the Menu Select button directly below OK .
9 Re-enter the new password.
10
Press the Menu Select button directly below OK .
The password is updated.
If the two passwords do not match, repeat step 5
through step 10.
NOTICE:
If you enter three incorrect passwords, the
radio exits the password feature. You cannot
access this feature again until you turn the
radio off and on.
Enabling or Disabling the Radio Lock
Feature (Secure Radios Only)
This feature allows you to enable or disable the radio lock
feature. It is programmable by a qualified radio technician.
1
or to LogF.
English
132