5 or to the required channel. Press the Menu
Select button directly below Sel .
The display shows Channel updated.
6
Press the Menu Select button directly below Exit to
return to Home screen.
Deleting a Channel in the Dynamic Zone
The radio must be in Dynamic Zone in order to perform this
operation.
1
or to ZnPr then press the Menu Select button
directly below ZnPr to enter Program Zone screen.
The display shows the dynamic channels list.
2 or to the saved dynamic channel then press
the Menu Select button directly below Del.
The display shows Channel deleted screen.
3
Press the Menu Select button below Exit to return
to Home screen.
The Home screen shows <Dynamic Zone
Channels>.
If the channel deleted is the Home channel, the
Home screen shows <Zone Name>“Blank”.
SmartConnect
SmartConnect allows you to have voice communication by
switching the device to any available network with the
priority order of Wi-Fi → LTE → Satellite when LMR is out
of range.
The radio can connect through a fixed Wi-Fi access point in
buildings or in-vehicle Broadband modems such as Sierra
Wireless modem MG90, VLM750, or Satellite modem.
When a channel is SmartConnect enabled and goes out of
range, the radio displays Out of Range and
SmartConnect capable icon . Once the device is
connected to the available network, the radio displays
SmartConnect and SmartConnect connected icon .
English
85
To Next Page
Loading...
