28
Basic Operating Procedures
Monitoring Conventional Mode Activity
This feature allows you to monitor channel traffic on conventional
channels by defeating the coded squelch. This feature must first be
enabled by a qualified radio technician or system administrator.
Do one of the following:
Take the microphone off hook.
(This is the same as monitor on. You hear all channel traffic.)
OR
1 Make sure you are in Home mode where the default zone and
mode are being displayed (page 26).
2 Press the or button to scroll to the MON softkey.
3 Pressing MON softkey momentarily toggles between MONITOR ON
and MONITOR OFF. MONITOR ON shown on the display indicates
that the radio is monitoring.
4 Pressing MON softkey again turns monitor off and you don’t hear
all channel traffic.
To Next Page
Loading...
