68
Conventional Radio Features
Storing a Unit ID Number in the List
The Selective and Call Alert page features share the same prestored
list of units’ IDs.
1 Press and hold the CALL softkey to review the Call ID list.
The Call indicator flashes and a high-pitched tone sounds.
2 Use the navigation keys to locate the list member you want to
change.
3 Press the NAME softkey to store a name
OR
press the NUM softkey to store a number.
4 Use the keypad mic to update the entry.
5 When all the digits are entered, press the SAVE softkey to store
the new ID.
6 Repeat steps 2 through 5 until all the desired IDs have been
entered.
OR
Do one of the following:
• Press the HOME button to return to normal radio operation.
OR
• Press PTT to exit the feature.
Note: The maximum number of characters permitted in a text line
is 14.
To Next Page
Loading...
