Motorola ASTRO XTL 2500

ASTRO XTL 2500 Digital Mobile Radio with M5 Control Head 41
General Radio Features
Changing Mode Priorities While Scan Is On
When active, this dynamic priority feature allows you to change the
priority of a non-priority mode in the scan list to priority 2.
Restoring Mode Priorities in a Scan List
1 Press DYNP softkey to change the priority of a non-
priority channel in the scan list to priority 2.
2 Press the HOME button momentarily to exit the scan list
and resume scanning.
You cannot alter the status of the priority 1 member.
To restore the original mode priorities in a scan list, do one of
the following:
• Press the RCL softkey.
• Turn scan off, then on.
• Change modes.
• Turn off the radio, and then turn it back on.