38
General Radio Features
Viewing a Scan List
1 Press and hold the SCAN softkey until the Scan indicator blinks
and a beep is heard.
The radio suspends scanning while a scan list is being
reviewed.
2 Press the button to scroll to the VIEW softkey.
3 Press the button below VIEW.
4 Press the button to scroll to the SCAN softkey.
5 Press the button below SCAN. The radio suspends
scanning while a scan list is being reviewed.
6 Press the or button to scroll through the preprogrammed
scan list.
7 Those modes that are in the scan list are indicated by N PRI,
PRI or blinking PRI indicator (indicating the mode’s assigned
priority as previously described).
8 Press RCL softkey to review only modes that are already in the
scan list.
Press the HOME button momentarily to exit the scan list and
resume scanning.
To Next Page
Loading...
