Motorola ASTRO XTL 2500

ASTRO XTL 2500 Digital Mobile Radio with M5 Control Head 43
General Radio Features
Deleting a Channel from the Scan List
Do the following:
1 Press the
 button to scroll to the PROG softkey.
2 Press the button below PROG.
3 Press the
 button to scroll to the SCAN softkey.
4 Press button below SCAN. The scan indicator
blinks and a good-key chirp is heard.
5 Press the
or button or rotate the Mode knob to
locate the channel to be deleted.
Press the SEL softkey momentarily to scroll through the available
priority choices until the priority choice disappears.
This indicates that the channel is no longer a member of the scan
list that was assigned to the selected channel.
OR
Press the RCL softkey momentarily to scroll through just the scan list
members.
OR
Delete a channel from a scan list by pressing DEL softkey.
Note: If you delete all members of a scan list, and scan is
subsequently turned on, you will hear a continuous low-
pitched tone, and the display will change to EMPTY LIST
You cannot delete the designated transmit mode, the
selected mode, or the fixed scan list members. The selected
mode, by default, is always scanned when scan is turned
on, regardless of whether or not it is explicitly programmed
as a scan list member.
Press the HOME button to exit scan list programming and return to
normal scan operation.