Motorola CDM1550-LS+ - Setting the Power Level

101
English
UTILITIES
SETTING THE POWER LEVEL B
Each channel in your radio has a predefined
transmit power level that can be changed.
• High power (S) allows you to reach a radio
that is farther away.
• Low power (R) conserves the battery’s
charge.
Notes:
• Be aware that a message received from
a nearby radio might change your radio’s
power level to low. This may cause radios
that are farther away not to receive your
transmissions.
• In PassPort mode, the power level is
predefined radio wide.
To set the power level:
Press the preprogrammed Power Level button
(see page 22) to toggle between low and high,
–or–
Do the following:
1
) to enter menu mode.
2
y or z until
3
) to select
4
y or z until
5
) to select
The display shows the current power
level.
6
y or z until
or until
7
) to confirm the selection.
8WLOLWLHV
8WLOLWLHV
3RZHU/HYHO
3RZHU/HYHO
3RZHU+LJK"
3RZHU/RZ"