79
English
PHONE
PHONE
Your CDM1550•LS+
radio allows you to place
and receive telephone calls through trunked
and conventional systems (depending on
phone line availability). Telephone calls
through a repeater allow only one person to
speak at a time.
MAKING A PHONE CALL D
THROUGH A TRUNKED SYSTEM
Note: The following instructions assume your
radio has been programmed as follows by
your dealer using CPS (Customer
Programming Software).
• Dial type: Live
• Access/Deaccess type: Immediate Auto
• Tone Span: Timed - 100 ms tone duration
To Initiate a Phone Call
Do the following:
1 Select a trunked zone and talkgroup that
have been programmed for telephone.
2 ) to enter menu mode.
–or–
Press the preprogrammed radio or DTMF
microphone Phone button, and skip to
step 5.
–or–
a. Press and release the Speed Dial
button to use the speed dial feature.
b. Press the (1 to 9) key corresponding
to the number you want to call on the
Phone list. Or press 0 if you want to
call the last number dialed.
c. Press the PTT button. A dial tone
sounds.
d. Press the PTT button again to send
the phone number.
–or–
For LTR trunked systems, press and hold
the PTT button while dialing a number.
3 y or z until
4 ) to confirm
3KRQH
3KRQH
To Next Page
Loading...
