91
English
VOICE STORAGE
RECORDED MESSAGE PLAYBACK
The CDM1550•LS+ allows you to list, select, 
and Playback previously recorded incoming 
call or voice memo messages. You can play 
back a message by using the preprogrammed 
Record/Playback button (see page 23) or your 
radio’s menu.
Note: Recorded message Playback cannot be 
initiated while your radio is receiving. Also, 
you don’t receive any incoming calls while 
you play back messages.
To Playback a Message using the 
Preprogrammed Record/Playback Button
8 Without pressing the PTT button, speak 
clearly into the microphone to record your 
memo. The radio records your memo 
until the message slot is full or until you 
press (.
Note: To stop recording at any time, press 
(.
9 Press ( to stop recording.
–or–
Repeat steps 7 and 8 to store additional 
messages.
3OD\LQJ0VJ;;;
1
Press and release the preprogrammed 
Record/Playback button.
• The first 
message plays, 
and the display shows (XXX = the 
message number).
2
To advance to the next message at any 
time during Play back, press and release 
the Record/Playback button again.
3
To exit/cancel Playback mode:
Press and release the preprogrammed 
Playback Exit button (see page 23).
 –or–
Press ( to stop Play Back.
3OD\LQJ0VJ;;;