Motorola CDM1550-LS+ - Call Alert

49
English
PASSPORT
SIGNALING
CALL ALERT
You can alert another person by sending a Call
Alert to a particular radio in three different
ways:
• Using a preprogrammed button.
• Through the menu.
• Using the One-Touch button.
Sending a Call Alert using the
Preprogrammed Button
• Press the preprogrammed Call Alert button
(see page 24). Proceed to Step 4.
Sending a Call Alert through the Menu
2 To answer the Selective Call, press the
PTT button to talk; release to listen.
3 ( to end the Selective Call.
Note: If the Selective Call has prematurely
ended,
you see:
and a tone sounds (if prepro-
grammed by your dealer).
&DOO(QGHG
1 ) to enter menu mode.
2 y or z until
3 ) to select
• The yellow LED indicator lights steady.
• The display shows F and the prepro-
grammed alias or ID of the last active
Call Alert is displayed.
4 If the unit has not
been engaged in a
Call Alert after
power-up, you see:
y or z to locate the desired alias or
ID in the Radio Call List.
–or–
y or z then press the first letter of
the desired alias using the DTMF keys to
start an alphabetical search. (Full keypad
model only.)
&DOO$OHUW
&DOO$OHUW
6HOHFW8VHU