Motorola CDM1550-LS+ - Receiving a Selective Call F

54
English
RADIO CALLS
–or–
RECEIVING A SELECTIVE CALL F
When you Receive a Selective Call
• The display shows F and the
preprogrammed name or ID of the calling
radio.
• The yellow LED flashes, if programmed by
your dealer.
• You hear an alert tone.
To answer the call, press the PTT button.
• The red LED flashes.
Note: Unless you make a Selective Call back to
the caller, within the preprogrammed
talkback time, your response is heard by all
members of your talkgroup.
1 ) to enter menu mode.
2 y or z until
3 ) to select
4 y or z until
5 ) to select
• The yellow LED lights steady.
6 y or z to locate the desired ID in the
Radio Call List.
–or–
Enter with the DTMF microphone the ID
number of the radio you want to call.
7 Press the PTT button to send the call.
• The radio sounds a continuous tone, if
programmed by your dealer.
• The yellow LED lights steady.
5DGLR&DOO
5DGLR&DOO
6HOHFWLYH&DOO
6HOHFWLYH&DOO
8 Press the PTT button and talk; release
the PTT button to listen.
• The red and yellow LEDs light steady.
9 ( to return to
–or–
Hold down ( to exit menu mode.
6HOHFWLYH&DOO