Motorola CDM1550-LS+ - Prioritizing a Talkgroup or Channel in a Scan List

76
English
SCAN
PRIORITIZING A TALKGROUP OR
CHANNEL IN A SCAN LIST
(SYSTEM SCAN OPERATION ONLY)
You may want to check the activity on one or
two talkgroups or channels more frequently
than others. You can do this by prioritizing
them:
6 y or z until
or until
7 ) to confirm your selection.
8
y or z until you see the talkgroup or
channel you want to add or delete.
Note: You cannot delete the Primary talk-
group or your selected talkgroup off a
Scan List in PassPort mode.
9
) to confirm your selection.
10
If you added a talkgroup or channel,
you see:
–or–
If you delete a talkgroup or channel,
you see:
) to confirm the deletion.
you see:
$GG(QWU\"
'HOHWH(QWU\"
(QWU\6DYHG
'HOHWH"
(QWU\'HOHWHG
11 ( to return to
to return to
–or–
Hold down t to exit menu mode.
Priority Channel Scanning Sequence
None specified Ch1➠Ch2➠Ch3➠
Ch4➠…Ch1
Channel 2
(Priority 1)
Ch2➠Ch1➠Ch2➠Ch3➠
Ch2➠Ch4➠Ch2➠…Ch1
$GG(QWU\"
'HOHWH(QWU\"