Motorola CDM1550-LS+ - Radio Check

57
English
RADIO CALLS
RECEIVING A CALL ALERT PAGE F
When You Receive a Call Alert Page
• The display shows
F
and the preprogrammed name or ID of the
calling radio.
• You hear four alert tones, either once or
continuously, as programmed by your
dealer.
• The yellow LED flashes once for a group
call, or flashes twice for an individual call.
The red LED flashes once.
To answer the page, press the PTT button; to
cancel the page, press any other button.
Note: Your radio displays only the last Call Alert
page received. Also, your radio does not
receive any future Selective Calls until you
clear the page.
RADIO CHECK
Radio Check allows you to determine if a radio
is within the range of the trunked system and
turned on, without disturbing the user of that
radio. This feature can also be used when
attempts with Selective Call and Call Alert fail.
To Perform a Radio Check
&DOO5HFHLYHG
1 ) to enter menu mode.
2 y or z until
3 ) to select
4 y or z until
5 ) to select
6 y or z to locate the desired ID in the
Radio Call list
–or–
Enter the ID number of the radio you are
checking.
7 Press the PTT button,
you see:
8 If the Radio Check is received by the
target radio, you see:
If not received, you see:
5DGLR&DOO
5DGLR&DOO
5DGLR&KHFN
5DGLR&KHFN
&DOO,Q3URJ
$FNQRZOHGJH
1R$FNQRZOHGJH