Motorola CDM1550-LS+ - Receiving a Phone Call Dthrough a Trunked or Conventional System

82
English
PHONE
RECEIVING A PHONE CALL D
THROUGH A TRUNKED OR
CONVENTIONAL SYSTEM
To Receive a Phone Call
8 Press and release the PTT button, if
required for your radio.
9 Hold the radio in a vertical position with
the microphone 1 to 2 inches (2.5 to
5 cm) away from your mouth. Press the
PTT button to talk; release it to listen.
10 To disconnect a phone call, do one of the
following:
Enter the deaccess code using the DTMF
microphone keypad.
–or–
If your radio has the deaccess code
programmed, go to step 9.
11 To exit Phone Mode:
Press and hold # to disconnect the
call. D disappears from the display.
1 y or z to select a LTR talkgroup or
conventional channel that has been
programmed for telephone.
–or–
Activate any scan type containing a
telephone talkgroup or channel (see
page 69).
Note: No PassPort talkgroup or zone
selection is needed in PassPort
mode.
• When a phone call is received, a
ringing tone sounds, alerting you to
answer the phone call.
Note: The D also appears on the display in
PassPort mode.