Motorola CDM1550-LS+ - Receiving a Selective Call F

48
English
PASSPORT
SIGNALING
Receiving a Selective Call F
• If the Selective Call cannot be estab-
lished,
you see:
for 5 seconds. The LED indicator turns
off.
• If all channels are busy while attempt-
ing a Selective Call,
you see:
and will hear a delayed busy tone as
long as the PTT button is pressed.
If the PTT button is kept pressed and
the system frees up a channel, the
radio automatically attempts to re-
establish the call.
• ( to end the Selective Call and
revert to talkgroup dispatch, or press
the preprogrammed Selective Call but-
ton. You can then manually re-initiate
the call. (See Step 1.)
4 Press the PTT button to talk; release to
listen.
1R$FNQRZOHGJH
6\VWHP%XV\
5 ( to end the Selective Call.
Note: If the Selective Call has prematurely
ended,
you see:
and a tone sounds (if prepro-
grammed by your dealer).
1 When you receive a Selective Call:
•The F blinks and, if preprogrammed by
your dealer, the yellow LED indicator
lights steady.
You see:
followed by the preprogrammed alias
or ID of the calling radio.
• Once the Selective Call is established
the F displays solid.
Note: If preprogrammed by your dealer,
your radio sounds a short high-
pitched tone (call established tone)
to indicate that you are ready to
engage in a conversation.
&DOO(QGHG
,QFRPLQJ&DOO