Motorola CDM1550-LS+ - View a Scan List; Adding or Deleting Talkgroups or Channels in a Scan List

75
English
SCAN
Note: In PassPort mode, talkgroups cannot be pri-
oritized.
Your radio cannot receive any calls while you
are editing a Scan list. The K symbol is
displayed while you are in edit mode.
Note: In Conventional operation only, even if
there is activity on a non-priority channel,
your radio automatically switches to an
active priority channel and indicates the
activity with a short tone.
VIEW A SCAN LIST
To view Talkgroups or Channels in a Scan list:
ADDING OR DELETING
TALKGROUPS OR CHANNELS
IN A SCAN LIST
To add or delete Talkgroups or Channels in a
Scan list:
1 ) to enter menu mode.
2 y or z until
3 ) to select
4 y or z until
Note: One Scan list per mode of operation
is available.
5 ) to select
3URJUDP/LVWV
3URJUDP/LVWV
6FDQ/LVW
6FDQ/LVW
6 y or z until
7 ) to confirm your selection.
8
y or z to see the talkgroup or chan-
nel is this list.
9
Hold down t to exit menu mode.
1 ) to enter menu mode.
2 y or z until
3 ) to select
4 y or z until
Note: One Scan list per mode of operation
is available.
5 ) to select
9LHZ/LVW
3URJUDP/LVWV
3URJUDP/LVWV
6FDQ/LVW
6FDQ/LVW