Motorola CDM1550-LS+ - Multiple Queued Emergencies; Three Minute Timer; After the Timer Expires; Clearing an Emergency Alert E

62
English
RADIO CALLS
Multiple Queued Emergencies
Clearing the existing displayed Emergency
shows the next in the queue, if one exists.The
display updates and shows “Emerg (queued
number) of (total number)”. If no additional
Emergencies are queued, the radio exits
Emergency mode and resumes normal mode.
Three Minute Timer
Responding to an Emergency starts a
three-minute timer. The radio does not
generate another Emergency Alert tone
against that Emergency Alias
(if
preprogrammed)
or ID until the three-minute
period expires. If cleared within 3 minutes, the
alarm will regenerate the alert.
If the radio receives another Emergency Alert
from the same Alias
(if preprogrammed) or ID,
the radio acknowledges the Emergency but
does not restart the tone, activate the external
alarm, or display updated information.
After the Timer Expires
If the three-minute timer has expired for a
specific Emergency Alias
(if preprogrammed) or
ID, and the radio decodes an Emergency that
is currently in queue, the radio:
• Acknowledges the Emergency
• Restarts the Emergency Alert tone
• Activates the external alarm
• Updates the time stamp on the matching
Emergency
Note: If the Radio Call List does not include an
Alias for the radio ID, the ID displays.
Radios that do not support the signaling
protocol sound the alert tone, activate the
external alarm and display data.
CLEARING AN EMERGENCY
ALERT E
(CONVENTIONAL OPERATION ONLY)
To Clear an Emergency Alert
1
Press any button on the radio to
cancel the Emergency Alert tone.
2
Press (or activate) an external push
button or foot switch.