Motorola CDM1550-LS+ - Roam Lock

41
English
PASSPORT
TRUNKING
ROAM LOCK
Because of the RSSI (Received Signal
Strength Indication) feature, the
CDM1550•LS+ radio automatically roams to a
different site when the signal falls below the
RSSI level programmed in your radio by your
dealer. In some instances (inside a building or
in fringe areas), you may want to prevent your
radio from roaming. This is possible by
enabling the Roam (Site) Lock function.
Note: If you are currently on an affiliated site and
wish to lock onto your home site, you need
to first press the preprogrammed Home Site
Revert button prior to pressing the prepro-
grammed Roam Lock button.
To Activate Roam Lock
To Deactivate Roam Lock
To deactivate Roam Lock, press the
preprogrammable Roam Lock button again or
turn off your radio or switch zones/talkgroups.
Your radio automatically re-registers onto the
PassPort system.
Note: Once deactivated, the radio follows the
roaming criteria programmed in the radio.
Notes:
• The radio must currently be registered on
an affiliated site.
• If the radio cannot register to its Home
Site, for whatever reason, the radio reverts
back to its current affiliated site.
1
Press the preprogrammed Roam Lock button
(see page 23).
2 You see.
Alternating with:
at one second inter-
vals.
• A good key chirp is heard.
Note: A radio can be roam-locked only
when it is registered to a site.
7/.*53$/,$6
5RDP/RFNHG