Motorola CDM1550-LS+ - Sending a Selective Call Using the One-Touch Button

47
English
PASSPORT
SIGNALING
Sending a Selective Call using the One-
Touch Button
and will hear a delayed busy tone as
long as the PTT button is pressed.
If the PTT button is kept pressed and
the system frees up a channel, the
radio automatically attempts to re-
establish the call.
• ( to end the Selective Call and
revert to talkgroup dispatch, or press
the preprogrammed Selective Call but-
ton. You can then manually re-initiate
the call. (See Step 1.)
7 Press the PTT button to talk; release to
listen.
8 ( to end the Selective Call.
Note: If the Selective Call has prematurely
ended,
you see:
and a tone sounds (if prepro-
grammed by your dealer).
&DOO(QGHG
1 Press and hold the preprogrammed One-
Touch button.
• The yellow LED indicator lights steady.
• The display shows F and the prepro-
grammed alias or ID is displayed.
2 The Selective Call is sent automatically.
3 • While the Selective Call is being
established the F blinks and the red
LED indicator flashes momentarily.
• Once the Selective Call is established
the F displays solid.
Notes:
• If preprogrammed by your dealer, your
radio sounds a short high-pitched tone
(call established tone) to indicate that
you are ready to engage in a conver-
sation.