Motorola CDM1550-LS+ - Receiving a Message; Responding to Emergency Alerts E

60
English
RADIO CALLS
RECEIVING A MESSAGE
When your radio receives a message:
• You hear two alert tones.
• The yellow LED flashes.
• You see:
alternating with the preprogrammed Alias.
Note: If you receive a message that is
programmed into your radio, the display
alternates with the following:
and
RESPONDING TO EMERGENCY
ALERTS E
(CONVENTIONAL OPERATION ONLY)
Your radio offers choices for initiating and
responding to Emergency Alert
communications. Choices may include:
• Emergency Cycles - Allows the radio to
automatically cycle between transmit and
receive mode over a preprogrammed
number of times by keying with voice after it
has received an Acknowledge to the alarm
you send. The default number of transmits
is one (10, maximum); the default value of
the retransmit interval is 5 seconds (one,
minimum; 60, maximum).
• Emergency Alarm/Call - Gives you access
to a voice resource, on a priority basis, over
all other types of call traffic.
• Emergency Remote Monitor - Enables
the dispatcher to activate the transmit
circuit of your radio, during an Emergency,
Notes: If the radio is not able to send the
message or the radio does not
receive an acknowledgement if an
acknowledgement is expected, you
see:
If the radio is not able to send the
message and no acknowledgement is
expected, you see:
1R$FNQRZOHGJH
1R&KDQQHO
0VJ5HFHLYHG
0HVVDJHB
1R$OLDV