Motorola CDM1550-LS+ - Page 77

77
English
SCAN
Note: In Conventional operation only, even if
there is activity on a non-priority channel,
your radio automatically switches to an
active priority channel and indicates the
activity with a short tone.
Setting Priority Talkgroups or Channels
Channel 2
(Priority 1) and
Channel 8
(Priority 2)
Ch2➠Ch1➠Ch8➠Ch3➠
Ch2➠Ch4➠Ch8➠…Ch1
1 ) to enter menu mode.
2 y or z until
3 ) to select
4 y or z until
5 ) to select
6 y or z until
Priority Channel Scanning Sequence
3URJUDP/LVWV
3URJUDP/LVWV
6FDQ/LVW
6FDQ/LVW
(GLW3ULRULW\"
7 ) to select
8 y or z until
or until
You see the current priority talkgroup or
channel.
9 ) to select the desired priority level.
10 y or z until you see the talkgroup or
channel you want to prioritize.
11 ) to prioritize that talkgroup or
channel.
12 ( to return to
–or–
Hold down ( to exit menu mode.
Note: You cannot reprioritize a priority 1
talkgroup or channel to priority 2.
(GLW3ULRULW\"
3ULRULW\"
3ULRULW\"
(GLW3ULRULW\"