Motorola CDM1550-LS+ - Page 30

30
English
GETTING STARTED
To Start Activate Direct Channel Access
Using the radio’s programmable buttons:
Using the DTMF microphone:
1 Press the preprogrammed Direct
Channel button.
The current talkgroup or channel flashes
intermittently.
2 Up or down arrow y or z to select
the appropriate Trunked talkgroup or
channel.
3 Press again the preprogrammed Direct
Channel button.
–or–
Press y or z.
The new selected talkgroup or channel
appears on the display.
<57.*3$/,$6
1:7.*3$/,$6
1 Press the preprogrammed Direct Chan-
nel button (A, B, or C).
The current talkgroup or channel flashes
intermittently.
2 Up or down arrow y or z to select the
appropriate Trunked talkgroup or channel.
–or–
If Menu/Channel Up feature is
preprogrammed on the DTMF microphone
press it to select the appropriate talkgroup
or channel.
3 Press again the preprogrammed Direct
Channel button.
–or–
Press select/enter button on the
microphone (if preprogrammed).
The new selected talkgroup or channel
appears on the display.
<57.*3$/,$6
1:7.*3$/,$6