Chapter 5 Tag Locator
Introduction
Use Tag Locater to detect the location of a tag. By providing the TagID of an item, this application can find the
relative position of the tag with respect to the mobile computer. Move the mobile computer back and forth to obtain
the location of the tag as indicated by the beep frequency and a vertical progress bar showing the relative position
of the tag.
The Tag Locater application requires the following components/DLLs on the device:
•
RFIDAPI32.dll (Version 5.1.15 or higher)
•
Symbol.RFID3.Device.dll (Assembly version 1.1.0.1, File version 1.1.0.7 or higher)
•
Symbol.Audio.dll
•
Symbol.dll
•
Symbol.Notification.dll
•
Symbol.StandardForms.dll
To Next Page
Loading...
Need help?
General