Motorola MC55A0 User Manual

Maintenance & Troubleshooting 6 - 7
MC55 shuts off. MC55 is inactive. The MC55 turns off after a period of inactivity. If the MC55 is
running on battery power, set this period from 1 to 5 minutes, in
one-minute intervals. If the MC55 is running on external power,
set this period to 1, 2, 5, 10, 15, or 30 minutes.
Check the Power window by selecting > Settings > System
> Power . Select Advanced and change the setting for a longer
delay before the automatic shutoff feature activates.
Battery is depleted. Replace the battery.
Battery is not
inserted properly.
Insert the battery properly. See Installing the Battery on page
1-5 .
Tapping the window
buttons or icons does
not activate the
corresponding feature.
Screen is not
calibrated correctly.
Re-calibrate the screen. Press Blue key - Backspace key or
tap > Settings > System > Screen > Align Screen button.
The system is not
responding.
Warm boot the system. See Resetting the MC55 on page
2-19 .
A message appears
stating that the MC55
memory is full.
Too many files
stored on the MC55.
Delete unused memos and records. If necessary, save these
records on the host computer (or use an SD card for additional
memory).
Too many
applications
installed on the
MC55.
Remove user-installed applications on the MC55 to recover
memory. Select > Settings > System Remove Programs.
Select the unused program and tap Remove.
The Charging/Battery
Status LED flashes
with the Power button
is pressed and the
MC55 does not turn
on.
The MC55’s battery
is low.
Recharge the battery.
Table 6-1 Troubleshooting the MC55 (Continued)
Problem Cause Solution

Motorola MC55A0 Specifications

General

Brand	Motorola
Model	MC55A0
Category	PDA
Language	English