4 - 8 MC55A0/MC55N0 Enterprise Digital Assistant User Guide
Available Services
The MC55 with Microsoft Bluetooth stack offers the following services:
•
OBEX Object Push Services via Beam
•
Serial Port Services
•
Personal Area Networking Services
•
PBAP Services
•
Dial-up Networking Services
•
A2DP/AVRCP Services.
See the following sections for information on these services.
Object Push Services via Beam
Use the OBEX Push Service to send files and contacts to another Bluetooth device. To transfer files between
the MC55 and another Bluetooth enabled device:
1. Ensure that Bluetooth is enabled and discoverable on both devices.
2. Ensure that the two devices are within 30 feet (10 meters) of one another.
3. Tap > Programs > File Explorer.
4. Navigate to the file to transfer.
5. Tap and hold on the filename until the pop-up menu appears.
Figure 4-6
File Explorer Window
6. Select Beam File. The MC55 searches for Bluetooth devices in the area.
7. Tap Tap to send next to the Bluetooth device to send the file to. The MC55 communicates with the device
and send the file. When completed, Tap to send changes to Done.
NOTE Some devices might not require a PIN. This depends upon the device’s authentication.
NOTE You can only send files to a remote device using the Beam function.
To Next Page
Loading...
Need help?
General
