Getting Started 1 - 5
1. Lift the SIM cover using the stylus tip.
Figure 1-3
Lifting the SIM Cover
2. Insert the SIM card, as shown in Figure 1-4, with the cut edge of the card facing out and the contacts facing
down.
Figure 1-4
Inserting the SIM Card
3. Lower the SIM cover and using the stylus tip, slide it in place.
4. Install the battery. See Installing the Main Battery on page 1-6 for more information.
5. After completing initial MC75 setup or after replacing a SIM card:
a. Press the red Power button.
b. On the Today screen, tap Wireless Manager.
c. Ensure Phone is on.
d. Press the red Power button to suspend the MC75.
e. Perform a warm boot. See Resetting the MC75 on page 2-14.
f. Make a call to verify cellular connection.
NOTE For detailed information about WWAN activation and settings, refer to the MC75 Integrator Guide.
To Next Page
Loading...
