Motorola MTM800 - Page 126

118
Setting Keypad Tone
To activate/deactivate keypad tone at every key press:
1. From the main menu, select Setup > Tones > Keypad
Tone.
2. Scroll through the settings (On/Off).
3. Choose required setting, and press Select, or press Back
to exit.
Setting All Tones
To activate/deactivate all tones (keypad tone and other
activity tones used in your MTM800 Enhanced):
1. From the main menu, select Setup > Tones > All Tones.
2. Scroll through the settings (On/Off).
3. Choose required setting, and press Select, or press Back
to exit.
Setting Talk Permit Tone
There are 3 tone settings:
• No Tone (no tone heard upon
pressing the PTT).
• Short Tone (a short tone heard upon
pressing the PTT).
• Normal Tone (the factory-default tone
heard upon pressing the PTT).
To change your Talk Permit Tone settings:
1. From the main menu, select Setup > Tones > Talk Permit.
2. Scroll through the settings.
3. Choose required setting, and press Select. Press Back to
exit.
When all tones are disabled, your MTM800 Enhanced switches
into covert mode, and all audio is routed to the handset
earpiece, instead of the speaker for low audio operation.
Remember to disable this feature, when your covert operation
is complete, to return your MTM800 Enhanced to high audio
operation.
No Tone
Short Tone
Normal Tone
Back
Tal k P ermit
Select