140
Location
Refer to “GPS Location Service” on page 79 for details.
Packet Data
This menu item allows to display
statistical values related to a packet data
connection. If Multi Slot Packet Data
Service is enabled by your Service
Provider the screens present information
about
• Amount of sent data,
• Amount of received data,
• Bandwidth of the data session
• Data encryption status.
Viewing Sent Data Statistics
1. Select Sent Data in the Packet Data sub-menu.
The number of KBytes sent since
current packet data activation is
displayed. Additionally the throughput
is shown:
9 kbps (e.g.) — active packet data
session.
N.A. — standby packet data session.
Viewing Received Data Statistics
1. Select Received Data in the Packet Data sub-menu.
2. The number of KBytes received since
current packet data activation is
displayed.
Additionally the throughput is shown:
Data services are only available in TMO. The data option must
be set to Voice&Data or Data Only. (Refer to “Setting Up the
Data Function” on page 116).
Back
Select
Sent Data
Received Data
Bandwidth
Encryption
Packet Data
Back
Sent: 100KB
Throughput: 9kbps
Sent Data
Back
Received: 100KB
Throughput: 9kbps
Received Data
To Next Page
Loading...
