165
What to do if...
What to do if...
Your MTM800 Enhanced flashes the following messages:
Messages Message Description
...-Rcvd Call received but not answered, or rejected.
Attachment
Failed
The MTM800 Enhanced could not perform talkgroup
attachment. The MTM800 Enhanced keeps on trying. If
it does not succeed, try another talkgroup.
Authenticate
Failure
The MTM800 Enhanced could not register on an
Authenticated system (for example, the Authentication
key is incorrect, or Authentication is disabled in the
MTM800 Enhanced).
Call Cancelled Called MTM800 Enhanced cancelled the call.
Call Ended • Faulty channel. Please try later.
• Called MTM800 Enhanced ended the call.
Call Preempted Channel being used for priority.
Emgcy In Use:
Wait For Mic
The Hot Microphone feature is active, but the channel
transmit grant has been given to another Emergency
Call on the same talkgroup. The MTM800 Enhanced
microphone is not active during this time, but the
MTM800 Enhanced will automatically try to regain talk
permit after a predetermined time.
Emgcy Mic
Ended
The Hot Microphone timer has automatically expired, or
the user has pressed the PTT button to cancel the Hot
Microphone feature.
Emgcy Mic On The Hot Microphone feature is active, and the MTM800
Enhanced is automatically transmitting hands free
emergency audio.
Empty Entry The speed number you dialled does not exist, or the
number exists but the group is non-selectable.
To Next Page
Loading...
